Driving During Bad Weather

Living in the Midwest has brought us from warm weather and sunny skies, to cold winds and snow covered streets in a drastic way this year. With the weather changing so rapidly, our friends over at Marquitz Buick, Cadillac, GMC in Troy, Missouri want to provide you with some tips for driving in the snow and ice. The best tip available for driving in bad weather is to not drive at all. Although, it is understandable that not driving is the safest way to avoid accidents, it is not realistic and sometimes a trip to the grocery store is necessary.

Driving safely on icy roads

1. Decrease your speed, and leave plenty of room to stop. You should allow at least three times more space between your vehicle, and the one in front of you.
2. Brake with slight pressure, and release the brake if you detect slippage.
3. Drive with your headlights on.
4. Remove snow, and any road grime from headlights and windshield.
5. Ice patches can be found in several spots even with temperatures above freezing. Be careful when driving on roads that are not traveled often.

If your wheels skid

1. Take your foot off the gas pedal, and steer in the direction the vehicle is traveling. If the vehicle is sliding right, steer right. You may have to steer left and right a few times in order to get the vehicle completely under control.
2. Most vehicles come standard with Anti-Lock Brakes (ABS), and you will need to put steady pressure on the pedal to help reduce the skid.

If you get stuck

1. Always travel with a cell phone in order to call for help if necessary.
2. Do not spin your wheels as this will dig the vehicle in deeper.
3. Try to clear the snow in front of the tires with either a shovel, or by turning the tires from side to side.
4. Place kitty litter, gravel, or salt in front of your tires to help gain traction.
5. Attempt to rock the vehicle back and forth. Check the owner’s manual first before attempting.

More information can be found at Weather.com, with the National Safety Council, the New York Department of Motor Vehicles, and the Washington State Government Information & Services.

Efficient home heating

Efficiently heated homes save money and increase potential sales

Sealing your house up tight for both winter and summer is the cost-effective way to go.
The temperature is inching up toward the 40s and every once in a while the sun shows promise. The days of subfreezing temperatures and windy blasts are over, right? Not so fast there. We humans can have remarkably short memories, and here it is just the middle of January. Instead of reminding your family that layering clothes is perfectly normal inside, let’s revisit why you should get serious about home heating efficiency.

While these tips are primarily about the heating season, they are just as applicable for the summer months too. An air leak is an air leak, whether heat is leaking or the cold air conditioning is leaking.

Stop the leaks. Finding air leaks is the first task on the road to make your home more heat efficient. Anywhere there is an opening in your house, the potential for air leaks exists. Check window frames, doorframes, attic entrances, electrical outlets and ductwork. To check for leaks, use a lit incense stick and watch for horizontal smoke. Hardware stores have a multitude of weatherproofing kits and caulking. Addressing even the most minor air leaks can result in substantial utility savings.

Ductwork systems may be wasting your energy dollars. Often overlooked, typical duct work can lose 25-45 percent of your heating or cooling energy. Look for leaky joints or holes in the duct system, disconnected ducts that have separated from each other and un-insulated or poorly insulated ducts in attics and crawlspaces.

Sealing ductwork is really a job for the professional, who can assess your problems, especially in unconditioned spaces. Minor fixes are temporary at best. Going the professional route can reduce your annual utility bills by as much as $300 and better yet, improves the overall air quality.

Total house insulation is another job for the pros. This is one of the most cost-effective ways to reduce energy loss and outside noise. Research the recommended standards for your region in R-values. The higher the R-value, the less transfer of heat through the material.

Thermostats can save big bucks. For every one degree you lower the temperature in your house over a 24-hour period, savings can go up three percent. Adjusting your thermostat down 10-15 percent for an eight-hour period each day gives you a 10 percent annual savings. Programmable thermostats will automatically turn the heat down while you are at work during the day and at night.

Ceiling fans aren’t just for summer. While we think of ceiling fans as a way to stay cool in the summer, they are also heat savers in the winter. By reversing the blades, ceiling fans re-circulate the rising warm air back down into the living area.

Plugging leaks is the single most effective way to make your home energy efficient not only for you and your family, but also for potential buyers, who are even more cost-conscious than usual.
And it shows your home is well taken care of and maintained.

Written by Myra Vandersall